2

2. Pad the support point well and pad flat to ensure that each support point is evenly stressed and the entire plate is stable.

3, the installation of each support point of the cast iron plate with adjustment pad iron pad, pad, by professional and technical personnel to adjust the plate to qualified accuracy.

4, the use of light to gently release the workpiece, do not move more rough workpiece above, so as not to cause damage to the working face bump, scratch and so on.

5, in order to prevent the overall deformation, after use, the workpiece should be taken off the cast iron plate to avoid deformation caused by long-term pressure on the workpiece.

6, when not in use, the working surface should be cleaned in time, and then coated with a layer of anti-rust oil, and covered with anti-rust paper, and the cast iron plate is covered with outer packaging to prevent damage to the working surface caused by carelessness.

7, should be installed in a ventilated, dry environment, and away from heat sources, corrosive gases, corrosive liquids.

8, the implementation of regular weekly inspection according to the standard, the verification cycle can be 6-12 months according to the specific situation.